POE Injectors (3 artikelen)
Prev[1]Next
Toon: Lijst Sorteer op:
VS02564 GV-PA902 GV-PA902BT is a 1-Port 10/100/1000 Mbps Gigabit Power over Ethernet (PoE) adapter. The adapter supports IEEE802.3af/at/bt Power over Ethernet standard, with a maximum power output

 VS02564
VS02564
VS00150 POE Injector 15.4W Power over Ethernet (PoE) Injector
1 Port, 48 V DC, IEEE 802.3af Compliant
	 
  	 
  	 

    Ideal when AC power is not available
    Full-power Class 3 PoE design
    Power output of up to 15.4 Watts
    Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras)
    Supports IEEE 802.3af detection and short circuit, overload and high-voltage protection
    Three-Year Warranty

Color

    Black

Specifications

    Standards
    IEEE 802.3af (Power over Ethernet)
    IEEE 802.3 (10Base-T Ethernet)
    IEEE 802.3u (100Base-TX Fast Ethernet)

    General
    Media support:
    - 100Base-TX Cat5 UTP/STP RJ-45, 8 pin
    Ports:
    - 1 RJ-45 100 Mbps input port
    - 1 RJ-45 100 Mbps data and power output ports
    - 1 power input connector (3 pin)
    Protection functions:
    - Short circuit protection for short GND
    - Overload protection for currents over 450 mA
    - High-voltage protection for output voltage exceeding 52 V
    Compatibility - general: all IEEE 802.3af-compliant PoE devices
    Supported INTELLINET NETWORK SOLUTIONS products:
    - Wireless 300N Access Points (524735, 524711)
    - High Power Wireless G Access Point (503082)
    - PoE Splitter (502900)
    - Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
    Certifications: FCC Class B Part 15, CE 89/336/EEC

    RJ-45 Input Connector Pinout
    Pin 1: Rx+ (data receive)
    Pin 2: Rx- (data receive)
    Pin 3: Tx+ (data transmit)
    Pin 4: NC (not connected)
    Pin 5: NC (not connected)
    Pin 6: Tx- (data transmit)
    Pin 7: NC (not connected)
    Pin 8: NC (not connected)

    RJ-45 Output Connector Pinout (Data + Power)
    Pin 1: Rx+ (data receive)
    Pin 2: Rx- (data receive)
    Pin 3: Tx+ (data transmit)
    Pin 4: -Vdc_return (+) (feeding power [+])
    Pin 5: -Vdc_return (+) (feeding power [+])
    Pin 6: Tx- (data transmit)
    Pin 7: -Vdc (feeding power [-])
    Pin 8: -Vdc (feeding power [-])

    LEDs
    AC Powered (Red)
    Channel Powered (Green)

    Power
    Input: 100 to 240 V AC, 50 to 60 Hz
    Output: 48 V DC / 350 mA
    Power consumption: 19 Watts (maximum)

    Environmental
    Plastic housing (ABS)
    Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
    Weight: 0.14 kg (0.3 lbs.)
    Operating temperature: 0 – 60°C (32 – 140°F)
    Operating humidity: 10 – 90% RH, non-condensing
    Storage temperature: -20 – 85°C (-4 – 185°F)

    Package Contents
    Power Over Ethernet Injector
    Power cable
    Instruction sheet

	 
 
 vs00150
VS00508 POE Injector 30W 1-Port Gigabit High-Power PoE+ Injector
1 x 30 W, IEEE 802.3at/af Power over Ethernet (PoE+/PoE)
Reduce costs by using existing Cat5 cable to provide both power and data. The Intellinet 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices. Reduce Wiring Costs No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

    Save time and money by delivering data and power via existing network cables
    Power output of up to 30 watts
    Supports all IEEE 802.3at and IEEE 802.3afcompliant PoE devices (Wireless LAN access points and bridges, VoIP [Voice over Internet Protocol] telephones, IP surveillance cameras)
    Supports IEEE 802.3at/af detection and short circuit, overload and highvoltage protection
    ThreeYear Warranty

  


  vs00508
 
Prev[1]Next